Basic Info.
Appearance
Coiled Material
Surface Finishing
Coating
Refractory Temperature
Antiflaming
Transport Package
Kraft Paper and Wrapped Film
Product Description
Building exterior wall panel veneer coil A grade flame retardant glass fiber mortar sheets
Shandong Runyao production and sales of glass fiber cement coating felt is used for external wall insulation board functional materials, using enhanced glass fiber mat as basal after coating process, coating amount is reduced three times than the number of traditional plastering so as to achieve the ordinary cement mortar plastering products can not meet the performance, greatly reduce the appearance of the wall insulation board weight.It has high bonding strength with polyurethane, smooth surface after lamination, better heat preservation, better anti-leakage and flame retardancy. The product is rolled, convenient for continuous production of factory production line, and has strong practicability.
Material | Glass fiber coated products |
Specification | 1200mm,1220mm (or customized width within 1360mm) |
Weight | 300GSM(±10g) |
Thickness | ≥0.6mm |
Color | Deep water mud color, Light water mud color, Brown, White, customized color and printed logo |
Remark | Product thickness, length, width can be made according to customer requirements. |
Scope of application:
Glass fiber cement coating felt is a functional material for the surface of external wall insulation board, which replaces the traditional cement grid cloth. It has high bonding strength with polyurethane, rock wool and other external wall insulation boards. After bonding, the surface is flat and the insulation performance is better. It has better performance of anti leakage and flame retardancy. The products are in roll shape, which is convenient for continuous production of factory production line.It can be used for various kinds of foam material surface and external wall Decorative veneer, etc. It has strong practicability.Label Appearance qualityProject | requirement |
Coil packaging | Kraft paper surround, wooden tray, no damage. |
Coil surface | No hole, no tear, straight edge, no notch. |
End of paper tube | It shall be flush with the coiled material, with depression and bulge ≤ 5mm. |
Coil end face | Dislocation ≤ 3mm |
Label location | It is horizontally installed in the middle of the coil and vertically installed 10cm below the upper edge guard |
Number of joints | No more than 3 splices shall be made within the range of 1500m, and the splicing length of each section shall not be less than 500m. Splicing is not allowed when the coil diameter is 500mm. |
Labe2 Physical and mechanical propertiesproject | Requirement |
width of cloth | Error of coil door width |
Roll length | More than 1500 meters, due to the purchase of fiberglass mat, the volume error of each coil is not considered. |
Gram weight | 300gsm ±10gsm |
colour | The color of the same batch of coiled materials is basically the same through visual inspection. |
Moisture content | ≤0.8 % |
Longitudinal tensile strength | >220N/50mm |
Transverse tensile strength | >100N/50mm |
Labe3 combustion performanceTip height | <150mm |
Flame retardant grade | Class A |
A simple judgment method of combustion performance and flame combustion | Self extinguishing within 2 seconds after leaving the fire |
Soft facing coiled material -- thin type
The reinforced fiberglass coating felt is soaked with inorganic composite gelling agent and made into thin sheet. The surface of the thin sheet is coated with water-based fluorocarbon, colorful imitation stone, texture sand.The finished latex paint is called soft facing coil, which can be bent at a large angle. Its production process is advanced, low VOC content, industrial standardized production.Its quality and output both have accurate guarantee.
Soft facing coiled material -- thick type
With natural stone texture and 3mm thick flexible facing roll, it can be directly used with polyurethane plate production line manufacturers to make the board that has the effect of decoration and insulation.Its decorative effect simulates natural stone such as marble and granite, with natural appearance and realistic texture.
Soft facing roll is widely used in: inorganic pre coated panel, thermal insulation decoration integrated panel, waterproof decorative wallpaper for internal and external walls.It can cooperate with insulation board enterprises, decoration integrated board building materials enterprises, inorganic pre coating board enterprises, coating enterprises, decoration companies, processing of incoming materials or OEM processing and other forms of cooperation.We have an annual output of 60 million flat composite veneer material production line, specializing in researching and developing the product of external wall insulation,glass fiber cement coating felt, flexible glass fiber reinforced decorative veneer roll.With high-quality products and good reputation, the company will build itself into a famous brand with core competitiveness of China's building fire protection, energy conservation and thermal insulation veneer materials.
Address:
FUXING SOUTH ROAD, PINGYUAN COUNTY ECONOMIC DEVELOPMENT ZONE, DEZHOU CITY, SHANDONG PROVINCE CHINA
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Health & Medicine, Textile
Management System Certification:
ISO 9001
Company Introduction:
Shandong Runyao Environmental Protection Technology Co., Ltd. (formerly Jinan Runcheng New Material Co., Ltd. ) was established in 2014. The company covers an area of 80000 square meters and it is a scientific and technological innovation manufacturer integrating production, sales and R & D. It has two wet process lines with an annual output of 120 million square meters. It adopts advanced German wet process technology and selects high-quality imported polyester staple fiber, PP polypropylene staple fiber, ES composite staple fiber and glass fiber as raw materials to produce different kinds of non-woven fabrics with a weight of 35-120g / m2. Meanwhile, it can provide non-woven fabric products with additional functions such as antibacterial, coloring, waterproof and flame retardant. At the same time, we have an annual production line of 60 million square meters of composite veneer materials, specializing in development and production of glass fiber cement coating felt, PVC floor glass fiber stable layer, humidification paper, flexible glass fiber reinforced decorative veneer roll, etc. Our products are exported to more than ten countries and regions such as Japan, South Korea, Europe and the United States. We have a complete and scientific quality management system, focusing on the needs of users, with high-quality products and good reputation. We want to build the enterprise into a famous brand with core competitiveness of China′s non-wovens composite materials.